Care of your Garments

Silk

1. Unpacking & Hanging
As soon as your package arrives, remove the gown from the box immediately.
• The Gravity Method: Hang the garment on a padded or rounded shoulder hanger
• Patience is Key: If possible, let it hang for a couple of days. This allows the natural
weight of the silk to help the creases fall out organically without the need for excessive
heat.
2. Preparation for Pressing
The bodice of this gown is designed to maintain its shape and should not need ironing. For the
skirt, follow these steps:
• Clean the Base: Ensure your iron’s baseplate is completely clean and free of any
mineral buildup or burnt fibres.
• The "Spot Test": Before touching the gown, test the heat on a scrap piece of similar
silk cloth or an inconspicuous inner seam.
3. Ironing the Skirt
If creases remain after hanging, you may press the skirt:
• Temperature: Use a medium-hot setting. Many irons have a specific "Silk" setting
which is ideal.
• Technique: Press on the reverse (inside) of the fabric whenever possible. Keep the iron
moving constantly to avoid scorching.
• Steam Warning: Use steam sparingly. Water droplets from a spitting iron can leave
semi-permanent "water spots" on certain types of silk.


Quick Tip: If you're nervous about direct heat, place a thin cotton pressing cloth between the
iron and the silk to act as a protective barrier.




  • Cotton


    Cotton gowns
    1. Unpacking & Refreshing
    Once your gown arrives, remove it from the packaging as soon as possible to prevent deep-set
    wrinkles.
    • Hanging: Place the gown on a sturdy hanger.
    • Relax the Fibres: Give the gown a gentle shake. Letting it hang for 24 to 48 hours allows
    the fabric to settle, which makes the ironing process much easier.
    2. Ironing & Steaming
    Cotton is a durable fibre that responds well to heat and moisture:
    • Heat Setting: Use a high heat (Cotton) setting on your iron.
    • Use Steam: Cotton responds beautifully to steam. Use your iron’s steam function
    liberally, or lightly mist the skirt with a spray bottle before pressing to help stubborn
    wrinkles release.
    • The Bodice: The bodice is structured and should not require ironing. Focus your
    efforts on the skirt area.
    3. Best Practices
    • Test First: Always test a small, hidden area first to ensure the iron is clean and the heat
    is appropriate for the specific weight of the fabric.
    • Iron Inside Out: To prevent any "shining" or "glazing" on the fabric iron the skirt on the
    wrong side (inside out).
    • Storage: Once pressed, keep the gown hanging in a cool, dry place with enough space
    so it doesn't get crushed by other clothing.